SDS

Safety Data
Sheet
Page 3 of 7
Tulip Dimensional Fabric Paint – S-19-0047
Appropriate engineering controls: No special requirements under ordinary conditions of use and with adequate
ventilation.
Individual protection measures, such as PPE (personal protective equipment):
Personal Protection Equipment:
Respiratory protection:
None required under normal handling conditions.
Eye protection:
Wear safety glasses with side shield.
Hand protection:
Protective gloves are not required commonly; on permanent skin contact gloves for low
mechanic and substantial stress are enough. Protective gloves to be applied have to
comply with the specifications of EU directive 89/686/EEC and EN 374, e.g. Matter:
Butyl Rubber; Thickness: >0,4mm; Penetration Time: >30minutes.
Skin protection:
Skin protection products are not as effective as protective gloves, so suitable protective
gloves are preferred if possible.
Further information:
This product is classified as non-hazardous. However, the usual precautions for harmful
chemicals must be observed to avoid contact with the skin, eyes and respiratory tract.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical
state/appearance:
Liquid
Color:
Various
Odor:
Slight
Odor threshold:
N/A
pH:
N/A
Boiling point/range:
>212°F
Melting point/range:
<32°F
Flash point:
Not applicable (aqueous system)
Evaporation rate:
0.62
Vapor density (Air=1):
1
Solubility(ies):
Miscible in water
Vapor pressure:
17.5 mm Hg @20°C (68°F)
Relative density:
N/A
Viscosity:
N/A
Partition coefficient
(n-octanol/water), if
applicable:
N/A
Explosive properties:
N/A
Flammability: (solid,
gas)
N/A
Flammability limit in
air:
upper/lower
N/A
Autoignition
temperature:
N/A
Decomposition
temperature:
N/A
10. STABILITY AND REACTIVITY
Chemical stability:
Stable under normal temperatures
Conditions to avoid:
N/A
Incompatible materials:
N/A