Metal Garden Shed OWNER'S MANUAL Instructions for Assembly SD-X66-H154CW Requires two people and takes 1-1.5 hours for lnstallation.
BEFORE YOU START Owner's Manual Prior to installation, it is important that you contact your local government authority to determine if building approval is required. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly instructions Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructions before you begin.
PLAN AHEAD Site Selection l Avoid overhanging trees as much as possible as leaves will make regular cleaning necessary and broken branches are a potential hazard. l Small trees,bushes or fences nearby can be helpful,acting as a wind break. Site Preparation The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required. The base can be constructed by treated timber or concrete,in order to stop the moisture getting into the shed.
NO. Qty. PART 1L 2 NO. 16-1 848mm 1R 2 17L 1 17R 1 18 6 432mm 1 19 600mm 3R 2 986mm 955mm 3L 2 986mm 955mm 2R 1 923mm 848mm 2L Qty.
NO. PART P1 Qty. NO. PART Qty.
GC 17R GE P10 15-2 P7 17L 19 P7 15-1 P11 P7 GC P11 17L GC 19 GE P7 15-1 P10 17R 21R 15-2 21L B4 GC B3 16 12 16-1 21L B3 B4 12 21R 9 10L P4 11 P3 P3 10R P3 P3 P3 P3 P4 1L 2L 1R 2R 3L 1R 7 5 P1 4L 6 3R D1 11 1L P4 8 D2 9 18 P3 4R P1 P4 C2 C1 C1 C3 C4 P1W C
NO. Qty. PART 1L 2 1R 2 1R F1 1L NO. x2 Qty.
NO. Qty. PART 3L 1 3R 1 F1 F1 3L 3R NO. PART Qty. 5 1 F1 F1 5 1、When diagonal measurements are equal,the frame is square. 2、The Floor Frame must be BOTH square AND level or the holes will not line up properly.
NO. PART Qty. P4 1 P1 1 Ⅰ P4 Ⅰ P1 S3 5 S3 F1 F2 NO. Ⅱ Ⅱ PART Qty. 1 P3 P3 S3 5 F1 NO. PART Qty.
NO. PART Qty. P3 1 P3 5 S3 F1 S3 F2 NO. PART Qty. P4 Ⅰ 1 P4 Ⅰ S3 F2 5 Ⅱ S3 F1 S3 Ⅱ F1 NO. PART Qty.
NO. Qty. PART 9 2 11 2 11 11 9 F1 9 Qty. NO. 21L 2 B3 2 21R 2 B4 2 12 2 NO. PART Qty. PART B3 12 21L 21L 21R B4 NO. Qty.
NO. Qty. PART 7 1 8 1 G2 4 7 8 7&8 G2 7 8 G2 NO. PART P3 Qty.
NO. PART Qty.
F1 C2 C1 C1 S3 S3 F1 -14-
NO. PART Qty. 16 1 16-1 1 F2 16 16-1 F2 F2 12 NO. PART 12 Qty.
NO. PART Qty. P11 1 P10 1 F1 S3 P11 F2 S3 P10 NO. PART P7 Qty. 2 F1 S3 P7 P7 NO. P7 PART Qty.
NO. PART Qty. P11 1 P10 1 F1 P10 S3 P11 NO. Qty. PART 2 19 F1 19 19 S3 NO. Qty.
NO. PART Qty. 15-1 2 15-2 2 GC Ⅰ 15-2 Ⅱ 15-1 4 Ⅰ Ⅰ F1 S3 F1 S3 17L GC 15-1 17R Ⅰ Ⅱ 15-2 Ⅰ Ⅱ NO. PART Qty. D1 1 D2 1 GB 2 GB F2 D1&D2 x2 NO. PART 18 6 F1 18 Qty.
NO. GD PART Qty.
