Level: Public Information HY-40R201PC C Bluetooth BLE 5.0 Module Specifications (40 pin) 07 Jan. 2018 Version:V1.0 Copyright © 2010-2019 SHENGRUN Technology Co., Ltd. All rights reserved. SHENGRUN Technologies assumes no responsibility for any errors which may appear in this manual, Furthermore, SHENGRUN Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here.
1. Description HY-40R201PC Bluetooth low energy single mode module is a single mode device targeted for low power sensors and accessories. HY-40R201PC offers all Bluetooth low energy features: radio, stack, profiles and application space for customer applications. The module also provides flexible hardware interfaces to connect sensors. HY-40R201PC can be powered directly with a standard 3V coin cell batteries or pair of AAA batteries. in lowest power shutdown mode it consumes only 0.
4. Product model Number: Hardware Model Description Product Mode Item 1 WMD40R201xx6PC PCB NO. HY-40R201PC Description PCB Antenna 5. FCC ID & IC ID & CE & BQB print format on the shield case: Model:HY-40R201PC FCC ID:2ADXE-HY-40R201PC IC: Shield Case Size: 23267-HY40R201PC 13.0*18.4*1.5mm 6. PCBA dimension size and picture HY-40R201PC / WMD40R201xx6PC( PCB F Antenna) (PCBA dimension size : 17.9*11.59*2.0mm). 7.Application Note: 7-1.
The equipment operating voltage from 1.8 V to 3.8 V, and ensure that the voltage slope faster than 0.5 V/ms (through BOD threshold). 7-5. Use the module in the production and the transport process, please insure module’s component protection, prevent the precision parts on the moduleDamaged (welding furnace exit and assembly, testing, delivery process, suggest using collision buffer material, not collide with each other) 7-6.
The antenna can't be near around metal parts and prevent material existence of electromagnetic radiation , Can affect the manipulation of the distance. 7-9. Assembly recommendation (2): Signal trace and power supply trace, don't cross layout, as show in below Fig.To avoid crosstalk, affect the receiving sensitivity.Assembly recommendation 1:Underneath the module antenna and RF circuit on themain board PCB copper need to clearance, and place close to the main board edge, as show in below Fig.
15 DIO_12 Digital I/O GPIO (I: 4mA max) 16 DIO_13 Digital I/O GPIO (I: 4mA max) 17 DIO_14 Digital I/O GPIO (I: 4mA max) 18 DIO_15 Digital I/O 19 JTAG TMSC Digital I/O 20 JTAG TCKC Digital I/O GPIO (I: 4mA max) JTAG TMSC; high-drive capability JTAG TCKC 22 DIO_16 TDO DIO_17 TDI 23 DIO_18 Digital I/O GPIO,JTAG_TDO; high-drive capability(8mA max). GPIO,JTAG_TDI; high-drive capability(8mA max).
Frequency range: 2402~2480MHZ (2.4GHz ISM band) Transmit power setting Range: -21 ~ +5 dBm typical ( differential mode o/p point characteristics ; programmable by software) Receiver sensitivity: -97dBm typical( differential mode o/p point characteristics) Pre-certified RF regurations for BQB BLE 4.2/5.0, CE ETSI RED, FCC, IC (Canada), (FCC and IC only for PCB antenna with shield case model); Another can Compliance for worldwide RF Regulations. Ultra low current consumption Transmit:6.
9-5.GPIODC Characteristics Parameter Test Condition Typical Unit GPIO VOH at 8-mA load IOCURR = 2, high-drive GPIOs only 2.68 V GPIO VOL at 8-mA load IOCURR = 2, high-drive GPIOs only 0.33 V GPIO VOH at 4-mA load IOCURR = 1 2.72 V GPIO VOL at 4-mA load IOCURR = 1 0.28 V 9-6.
11. Functional Block Diagram 12. Working mode schematic : 13.Antenna size, gain and test data information : ( Antenna gain: 2.813dBi at 2440MHz ) 8 /12 V1.0www.tuner168.
9 /12 V1.0www.tuner168.
14. Recommend Reflow Profile( Leadless solder cream: Sn 96.5%, Ag 3%, Cu 0.
Integrator is reminded to assure that these installation instructions will not be made available to the end-user of the final host device. The final host device, into which this RF Module is integrated" has to be labeled with an auxiliary label stating the FCC ID of the RF Module, such as "Contains FCC ID: 2ADXEHY-40R201PC "This device complies with part 15 of the FCC rules.
-Connect onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult Consult the dealer or an experienced radio/TV technician for help Industry Canada (IC) Statement This device complies with Industry Canada licence‐exempt icence‐exempt RSS standard(s).
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules FCC Part 15.247 2.3 Specific operational use conditions This transmitter/module and its antenna(s) must not be co-located or operating in conjunction with any transmitter. This information also extends to the host manufacturer’s instruction manual. 2.4 Limited module procedures not applicable 2.
host product manufacturer, installing the modular transmitter, perform some investigative measurements to confirm that the resulting composite system does not exceed the spurious emissions limits or band edge limits(e.g., where a different antenna may be causing additional emissions). B. The testing should check for emissions that may occur due to the intermixing of emissions with the other transmitters, digital circuitry, or due to physical properties of the host product (enclosure).