User's Guide

If using RadioLINK Smoke/Heat Alarms then they should be mounted with antennas in the

same orientation (i.e. essentially parallel). This means picking a part of the building, say the

front wall of the building and then installing all mounting plates in the same orientation

with respect to this (see figure 6).

5. Connect the battery to the battery snaps as shown in the Quick Start Guide (for 9V

Replaceable Battery models only).

6. Carefully line up the unit on the base, gentle press home & twist on.

Install all the other Alarms similarly.

Large

hole

nearest

front

wall

Orientate all

mounting plates

in the same

direction

Front Wall Front Wall

Mounting Plate Mounting Plate

Mounting Plate

Figure 6