Revision 0 September 2010 4 in 1 Strength Station Owner’s Manual Record Serial Number Here www.tunturi.com Date of Purchase PG6251說明書101025---001 拚版用-12.indd 1-2 Platinum by Tunturi www.tunturi.
Instructions Contact Frame Components Congratulations on the purchase of your new 4 in 1 Strength Station. This gym will provide you with a lifetime of enjoyment to meet your strength training needs. Platinum by Tunturi strives to build the best quality multi-station gyms and to package these gyms in such a way to avoid any damage during shipping. Benelux Accell Fitness Benelux In order to get started with your assembly you should first familiarize yourself with this manual.
Contact Instructions Frame Components Congratulations on the purchase of your new 4 in 1 Strength Station. This gym will provide you with a lifetime of enjoyment to meet your strength training needs. Platinum by Tunturi strives to build the best quality multi-station gyms and to package these gyms in such a way to avoid any damage during shipping. Benelux Accell Fitness Benelux In order to get started with your assembly you should first familiarize yourself with this manual.
Bolt Length Note: Bolt length is measured from the underside of the head of the bolt. Layout Diagram with Leg Press The Platinum with Leg Press has a layout dimension of 14’-4” (width) x 6’-7” (length) x 7’-2” (height). There should be a minimum of 18”, preferably 24”, of working space around the entire unit. Platinum by Tunturi PG6251說明書101025---001 拚版用-12.
Bolt Length Note: Bolt length is measured from the underside of the head of the bolt. Layout Diagram with Leg Press The Platinum with Leg Press has a layout dimension of 14’-4” (width) x 6’-7” (length) x 7’-2” (height). There should be a minimum of 18”, preferably 24”, of working space around the entire unit. Platinum by Tunturi PG6251說明書101025---001 拚版用-12.
Step 25: Final Assembly and Troubleshooting Platinum by Tunturi strives to give you the very best in quality, performance and safety through carefully engineered designs and excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule below should be followed. IMPORTANT - Check These Components Before Using Gym: • Preventive Maintenance Clean upholstery, grips, and roller pads with mild soap and water generally after every use.
Step 25: Final Assembly and Troubleshooting Platinum by Tunturi strives to give you the very best in quality, performance and safety through carefully engineered designs and excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule below should be followed. IMPORTANT - Check These Components Before Using Gym: • Preventive Maintenance Clean upholstery, grips, and roller pads with mild soap and water generally after every use.
Pre-Assembling Instructions Cable Adjustments • • NOTE: is important toofposition Upper Adjust cables to It proper tension from any the locationsthe shown below. Body and the Lower Body Note: All cables with threadedMake adjustable ends must are have approximately at least 1/2” of the threads threaded in to its counterStations accordingly. sure they 5 foot 1 inch part.
Cable Adjustments • Adjust cables to proper tension from any of the locations shown below. Note: All cables with threaded adjustable ends must have at least 1/2” of the threads threaded in to its counterpart. It is very important that the 1/2” Jam Nut be wrench tightened to the counterpart to ensure that the threaded adjustable end of the cable does not back out of its counterpart. • Note: If the top plate raises off of the second plate in the weight stack, then the cable tension is too tight.
Step Note: Be sure to remove the 3/8” x 5” bolts from the top of the Lower Body 2: 5 Continued: Station and the Upper Body Station and use the 3/8” x 5 1/4” bolts provided with the Functional Trainer. Step 6: 3: NOTE: Attach the Pulley Holder/Support Plates to the Upper Support Brace loosely BEFORE installing the Upper Support Brace. This will help continue to make the installation process effortless.
Step Note: Be sure to remove the 3/8” x 5” bolts from the top of the Lower Body 2: 5 Continued: Station and the Upper Body Station and use the 3/8” x 5 1/4” bolts provided with the Functional Trainer. Step 3: 6: NOTE: Attach the Pulley Holder/Support Plates to the Upper Support Brace loosely BEFORE installing the Upper Support Brace. This will help continue to make the installation process effortless.
Step 4: Step 5: Note: Make Sure Cable is not pinched in between the tube and the pulley support plate. Further cable routing instructions are on the next page. Step 4a: Repeat step 4 for opposite (Left) side Step 5a: Repeat step 5 for opposite (Left) side Figure 5 Figure 4 All Flat Washers and Nylocks are 3/8” unless otherwise noted. Item # 17 23 24 27 32 33 34 35 37 40 41 All Flat Washers and Nylocks are 3/8” unless otherwise noted.