Safety Information

Report No.: AGC04298180501ES01
Page 15 of 51
EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.1.4
Insulation of conductors
The insulation of the individual
conductors is suitable for the
application and the working voltage.
P
3.1.5
Beads and ceramic insulators
N
3.1.6
Screws for electrical contact pressure
N
3.1.7
Insulating materials in electrical connections
N
3.1.8
Self-tapping and spaced thread screws
N
3.1.9
Termination of conductors
N
10 N pull test
N
3.1.10
Sleeving on wiring
No sleeving used to provide
supplementary insulation
N
3.2
Connection to a mains supply
N
3.2.1
Means of connection ........................................... :
Class III equipment
N
3.2.1.1
Connection to an a.c. mains supply
N
3.2.1.2
Connection to a d.c. mains supply
N
3.2.2
Multiple supply connections
N
3.2.3
Permanently connected equipment
N
Number of conductors, diameter (mm) of cable
and conduits ........................................................ :
--
3.2.4
Appliance inlets
N
3.2.5
Power supply cords
N
3.2.5.1
AC power supply cords
N
Type ...................................................................... :
--
Rated current (A), cross-sectional area (mm
2
),
AWG ..................................................................... :
--
3.2.5.2
DC power supply cords
N
3.2.6
Cord anchorages and strain relief
N
Mass of equipment (kg), pull (N) ........................ :
--
Longitudinal displacement (mm) .......................... :
--
3.2.7
Protection against mechanical damage
N
3.2.8
Cord guards
N
D (mm); test mass (g) .......................................... :
--
Radius of curvature of cord (mm) ......................... :
--
3.2.9
Supply wiring space
N
3.3
Wiring terminals for connection of external conductors
N