Safety Information

Report No.: AGC04298180501ES01
Page 46 of 51
4.7
TABLE: Resistance to fire
P
Part
Manufacturer of material
Type of material
Thickness
(mm)
Flammability
class
Evidence
--
--
--
--
--
--
Note(s): refer to table 1.5.1
4.5.5
TABLE: ball pressure test of thermoplastic parts
N
allowed impression diameter (mm) ........................ :
--
--
Part
Test temperature(°C)
Impression diameter
(mm)
--
--
--
Note(s): --
5.1
TABLE: touch current measurement
N
Measured between:
Measured(mA)
Limit(mA)
Comments/conditions
--
--
--
--
Note(s):--
5.2
TABLE: electric strength tests and impulse tests
N
Test voltage applied between:
Test voltage (V)
Breakdown
--
--
--
Note(s): --
5.3
TABLE: fault condition tests
P
ambient temperature (°C) ................................................. :
24.0
--
rated markings of power supply ....................................... :
--
Component no.
Fault
Test
voltage (V)
Test
time
Fuse no.
Result
Openings
covered
12
1h
--
No high temperature and hazards.
R6
S-C
12
10min
--
No damage and hazards.
U3, Pin 2-5
S-C
12
10min
--
No damage and hazards.
R1
S-C
12
10min
--
No damage and hazards.
U23, Pin 4-2
S-C
12
10min
--
No damage and hazards.
C2
S-C
12
10min
--
No damage and hazards.