Safety Information

Report No.: AGC04298180501ES01
Page 8 of 51
EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1.7.7.3
Terminals for d.c. mains supply conductors
N
1.7.8
Controls and indicators
P
1.7.8.1
Identification, location and marking ..................... :
It is obviously unnecessary.
N
1.7.8.2
Colours ............................................................... :
The colours used for LED are
indicating function. No safety
consideration.
P
1.7.8.3
Symbols according to IEC 60417 ......................... :
N
1.7.8.4
Markings using figures ........................................ :
Not applicable.
N
1.7.9
Isolation of multiple power sources ..................... :
No direct connection to mains
supply
N
1.7.10
Thermostats and other regulating devices
No thermostats or other regulating
devices used inside battery pack are
not adjustable during normal use.
N
1.7.11
Durability
The marking withstands required
tests.
P
1.7.12
Removable parts
No such parts.
N
1.7.13
Replaceable batteries
N
Language(s).......................................................... :
--
1.7.14
Equipment for restricted access locations ............ :
N
2
PROTECTION FROM HAZARDS
P
2.1
Protection from electric shock and energy
hazards
No hazardous parts in operator
access areas.
P
2.1.1
Protection in operator access areas
P
2.1.1.1
Access to energized parts
No energized parts.
P
Test by inspection ................................................ :
--
Test with test finger(Figure 2A) ........................... :
--
Test with test pin (Figure 2B) ................................ :
--
Test with test probe (Figure 2C) ........................... :
--
2.1.1.2
Battery compartments ......................................... :
N
2.1.1.3
Access to ELV wiring
N
Working voltage (Vpeak or Vrms); minimum
distance (mm) through insulation
--
2.1.1.4
Access to hazardous voltage circuit wiring
N
2.1.1.5
Energy hazards ................................................... :
P
2.1.1.6
Manual controls
N
2.1.1.7
Discharge of capacitors in equipment
No primary circuit.
N
Time-constant (s); measured voltage (V) ............. :
--