Manualshelf

Owners Manual

ManualsBrandsTurbo Air ManualsCommercial Equipment66" Table Bone Saw with 0.75 HP Motor, Stainless Steel Construction, Electrical Control System, Protection Against Water Damage, Thickness Adjusting and Easy Cleaning
12345678910
5
SPECIFICATION
MOTOR WIRING
MODEL GBS-230A GBS-270S
Dimension 19.8"x28"x37.5" 27.1"x44.6"x65.5"
Motor AC120Vx1Phasex3/4HP AC120Vx1Phasex1.5HP
Weight 88lbs 275lbs
Table
Stationary 7.6"x19.7" 11"x30"
Carriage 13.8"x22.4" 9.5"x13"
Loading 14" 22.2"
Length of Saw Blade 65.5"(1665mm) 92.9"(2360mm)
1. Interchange of current is made in motor outlet box. Changing instructions are on motor
plate or motor outlet box.
2. All Meat Saw are wired 120 volts unless otherwise specified. Be sure motor specifications
(voltage, cycle, phase) match power supply line. Be sure line voltage is up to specification.
3. Connect leads to machine in a manner that will be approve by local electrical inspectors.
4. We recommend not less than No. 12 wire, otherwise an overload condition may occur.
5. The V-Belt is packed loose in machine to prevent deformation, and must be installed of
pulleys at time of wiring motor.
6. The GERMANY KNIFE CORP is not responsible for permanent wiring. connection or
installations.