For service contact: German Knife Inc. 1-800-500-3519 www.turboairinc.com OWNER & OPERATOR INSTRUCTION MANUAL Model No. GBS-450S IMPORTANT SAFETY NOTICE To ensure safe and trouble free performance of you new German knife slicer, we suggest that all personnel who will use and maintain the slicer read and understand the manual before operating the equipment. Should there be any questions or if we can be of further assistance, please call us toll free at (800) 500-3519. www.turboairinc.
TABLE OF CONTENTS PAGE LUBRICATION INSTRUCTION 3 FRAME PARTS 4 UPPER SAW WHEEL PARTS 5 LOWER SAW WHEEL PARTS 6 SAW GUIDE PARTS 7 DRIVE PARTS 8 FRONT SCRAPER PARTS 9 REAR SCRAPER PARTS 10 MEAT GAUGE PARTS 11 TABLE PARTS 12 ELECTRIC CURCUIT 13 WARRANTY INFORMATION 14 German Knife Industries 4184 E. Conant St., Long Beach, CA 90808 Phone : 800-500-3519 Fax : 310-900-1066 www.turboairinc.
LUBRICATION INSTRUCTIONS TENSION HANDLE : Lubricate daily with edible oil while screwing in and out UPPER WHEEL : 2-4 strokes with grease gun every 30 days as needed UPPER BLADE GUIDE SUPPORT BAR : Lubricate daily with food grade oil while moving up and down LOWER WHEEL & BEARING HOUSING : 2-4 strokes with grease gun every 30 days as needed MEAT CARRYING TABLE WHEELS : Lubricate daily with edible oil MOTOR : If equipped with grease fittings grease every six months with bearing grease 3
FRAME PARTS ྜ ྚ ྙ ྛ ྜྷ ྞ ྦྷ ྟ ྦ ྠ ྥ ྡ ྤ ྡྷ ྣ ITEM DESCRIPTION PART NO. USE ITEM DESCRIPTION PART NO.
UPPER SAW WHEEL PARTS ITEM PART NO. USE 1 Guide Block LH DESCRIPTION PART NO.
LOWER SAW WHEEL PARTS ITEM DESCRIPTION PART NO.
SAW GUIDE PARTS ITEM DESCRIPTION PART NO. USE 1 Blade Support Adj. Bar 301401 1 2 Blade Guard Assy. Rh 301402 1 3 Knob 301403 1 4 Blade Guard Extension Rh 301404 1 5 Extension Stop 301405 1 6 Blade Guide 301406 1 7 Holder 000152 1 8 Lock Nut 301408 1 9 Hand Grip Hex Nut 000154 1 10 Knob 301410 1 11 Blade Support Bar Guide 000157 1 12 Blade Guard Assy. W/Ext-Rh 301412 1 13 Blade Guard Assy. W/Ext & Adj.
DRIVE PARTS ITEM DESCRIPTION PART NO. USE 1 V-Belt 301501 1 2 Driven Pulley(8.
FRONT SCRAPER PARTS ITEM DESCRIPTION PART NO.
REAR SCRAPER PARTS ྙ ྡ ྚ ྛ ྡྷ ྜ ྜྷ ྟ ྠ ITEM 1 ྞ DESCRIPTION PART NO.
MEAT GAUGE PARTS ྚ ྜ ྛ ྙ ྡྷ ྟ ྣ ྠ ྤ ITEM 1 ྞ ྜྷ ྥ ྡ DESCRIPTION PART NO.
TABLE PARTS ITEM DESCRIPTION PART NO.
ELECTRIC CURCUIT Main Switch Open Block Open Block Close Block Motor (3Φ 208V 60Hz 3HP) Lower Upper Door Door GRN T1 L1 L2 L3 T2 T3 NO A2 A1 Magnet Switch Signal Light A2 L1 L2 L3 NO Thermal and Magnetic Protection T1 T2 T3 Main Power 3Φ 208V 60Hz 13 R S T GRN MODEL GBS-450S
LIMITED WARRANTY Warranty Claims... All Claims for parts or labor must be made directly through German Knife or Radiance. All claims should include the model number, serial number, proof of purchase, date of installation and all pertinent information supporting the alleged defect. All warranty claims must be authorized by German Knife or Radiance prior to the purchase of parts or labor. Failure to comply with these warranty policies will result in the voiding of warranty claims. Products Under Warranty...
