Owners Manual

CLEANING

SHARP KNIFE

TO AVOID SERIOUS

PERSONAL INJURY

• The slicer knife is very sharp. Exercise extreme caution when working near the knife.

• Unplug machine power cord and turn the thickness dial fully clockwise before cleaning.

• It may be desirable to wear non-cutting gloves the cleaning operation.

• Do not put the components in dishwasher.

• Do not hose down or pressure wash any slicer part.

• Do not use bleach or other caustic/strong detergents on the slicer base or components.

• Do not allow moisture to get into knife hub.

• Do not use a scrubber pad, steel wool, or abrasive material to clean the slicer.

• Never remove the sharpener from the slicer or immerse it in water.

• Use a clean cloth soaked in the mild detergent and warm water to wipe all surface of slicer.

• Rinse using a fresh cloth and clean water. Allow parts to air dry.

This machine must be thoroughly cleaned and sanitized after each days operation or after being idle

for an extended period of time.

This machine components are easily disassembled without the use of special tools.