Owner's Manual

14
DISPLAY PANEL OF DUAL TEMP
BASIC OPERATION
1. Plug in and the display panel will be lighted and make a beep sound. The compressor
will begin to run.
2. The compressor is automatically cycled by the electronic controller (PCB).
3. The defrost cycle is automatically controlled by the PCB.
4. Good air flow in freezer/refrigerator unit is critical.
Be careful to load product so that it neither presses against the back wall, nor
reaches within four inched from the evaporator compartment.
- When the inside temperature is lower than -49ºF (-45ºC), the panel will display ‘
and higher than 64.4ºF (18ºC), the panel wil display ‘ ’.
- By pushing the up/down button, you can set the inside temperature.
- If you want lower temperature push the down button to be lighted lower level numbers.
TEMP.
SETTING
REFRIGERATORFREEZER
TEMPERATURE
TEMP. CONTROL
BUTTON
TEMP. CONTROL
BUTTON
TEMPERATURE
EVA FAN
INDICATOR
EVA FAN
INDICATOR