Owner's Manual

FOR HYDROCARBON REFRIGERATION UNITS

WARNING

• Handle the unit with care in order to avoid any serious damage to the refrigeration

system.

• The refrigerant tubing, condenser, and evaporator coils are prone to damage

while handling, moving, installing, and cleaning the unit, which may lead to fire or

even explosion.

• Refrigerant squirting out of the pipes could ignite or cause an eye injury. If a leak

is detected, avoid any naked flames or potential sources of ignition and air the

room in which the appliance is located.

• To avoid the creation of a flammable gas-air mixture from a leaking refrigerating

circuit, the size of the room in which the appliance is placed depends on the

amount of refrigerant used. The room must be 35.31ft

3 (

1m³) in size for every

0.28oz (8g) of R-600a refrigerant inside the appliance. The amount of refrigerant in

your particular appliance is shown on the label inside the cabinet.

• Never start up an appliance showing any signs of damage. When in doubt, contact

a qualified service professional.

• In case of any hazardous activities such as fire or explosion, move the unit away

from any source of ignition to a well ventilated area.

• Further service and repair must be done by a qualified technician who is familiar

with the safety standards, and also has thorough understanding and knowledge

of the flammable refrigerants.

• Any individuals handling these units must be equipped with proper personal

protection and equipment and follow applicable safety measures and precautions

to avoid risk of fire or explosion.

This appliance contains a small amount of propane (R-290) or isobutane

(R-600a) refrigerant, a natural gas with high environmental compatibility,

but it is also combustible. When transporting and installing the appliance,

ensure that no part of the refrigerating circuit is damaged.