Installation Sheet

Turbo air

BASIC OPERATION

1. Plug in and turn on the power and lamp switch, located at the top right side of the

bottom grille.

2. The default temperature setting is No. “-8˚F” for the Glass door Freezers.

3. The default temperature setting is at 16℉(-8.9℃) for the Glass door Ice

Merchandisers.

4. The compressor is automatically cycled by the electronic controller (PCB, F-Sensor).

5. The defrost cycle is automatically controlled by the D-sensor and PCB.

6. Press the temperature up button for higher temperatures and the temperature down

button for lower temperatures.

7. The motor of the evaporator fan will run once all the doors are completely closed.

8. It is critical to maintain good air flow in the freezers.

Please be mindful when storing food product in the unit. Make sure not to place

food products too close to the evaporator compartment, and leave at least 4 inches

of room from the evaporator compartment.