Use and Care

2
HOW TO INSTALL
In good ventilation.
• Place the refrigerator in well
ventilated area for better
cooling.
Install the refrigerator
indoor do not get unit wet.
• This unit is designed for
indoor usage only.
Ambient temperature
should be below 85°F.
Warmer temperature will
cause problems with
cooling efficiency.
Place the refrigerator on
hard and level floor.
• Unlevel floor may cause the
refrigerator to make noise.
Avoid places that are
exposed to smoke.
• Discoloring can occur to the
refrigerator.
Adjust the temperature in
the refrigerator.
• Controller is attached on the
upper right hand.
• Set the temperature control
at normal position.
Put away heat source from
the refrigerator.
• High ambient temperature
will make cooling efficiency
lower.
Place the refrigerator in an
area with low moisture.
• Splashing water or a high
moisture area may cause
short circuit and make
rusting easier.
To Level:
• Place leveler on all four
corners, must be level,
Leveling legs can be
adjusted CW or CCW as
needed.