CAUTION! PLEASE KEEP POWER SWITCH ON BEFORE OPERATING THIS EQUIPMENT Turbo Air Speed up the Pace of Innovation Ice Cream Dipping Cabinets Installation and Operation Manual Please read this manual completely before attempting to install or operate this equipment! TIDC-26G(W) TIDC-47G(W) TIDC-70G(W) TIDC-91G(W) www.turboairinc.
CONTENTS Names of Components 3 Specification 4 About the TIDC Models 5 Installation 6 Adjusting the Temperature 7 Defrosting 8 Safety Precautions 9 Tips 10 Managing and Storing 10 Before Requesting for Service 11 Precautions 12-13 Warning / Caution 14-15 Warranty 16-18 2
NAMES OF COMPONENTS TIDC - 26 G / W 1 2 3 4 1 : TIDC - Turbo Ice Dipping Cabinet 2 : Model Dimension Width (Inch) 3 : Color - Green 4 : Color - White Cabinet Door Cabinet Window Cooling Cover Shelves Shelves Cover 3
SPECIFICATION *. TIDC-47 View *. TIDC-70 View 22 1/4" 43 7/32" 43 7/32" 26 1/8" 26 1/8" 14 27/32" 46 31/32" 9 1/4" 31 17/32" 20 1/4" 49 17/32" 34 1/2" 3 9/32" 31 17/32" 20 1/4" 49 17/32" 34 1/2" 3 9/32" 44 1/2" 14 27/32" 70 7/16" 9 1/4" 23 9/32" 23 9/32" 68" *. TIDC-26 View *.
ABOUT THE TIDC MODELS ▣ It is designed to provide maximum convenience to users and store ice cream products. ▣ You can adjust the temperature of the freezer system from 9℉ to -5℉. ▣ The cooling system is equipped with customized cooling coil characterized by low noise to improve temperature deviation and energy efficiency. ▣ It is equipped with a PVC shelf with a handle to enable placing ice cream containers easily and arranging each of them stably.
INSTALLATION Installing Install on a flat ground. Otherwise, it may result in movement of the product, interference in drainage, or noise and vibration. Do not install near places with rain, snow, direct sunlight, heating equipment, or humid space It may decrease the cooling capacity and shorten the life cycle of the product.
ADJUSTING THE TEMPERATURE • The set value will flash every 0.5 seconds. Use the [ ] or [ ] key to set (change) the value. • After changing the set value, press the [MD] key to save the value and return to the operation mode. • If you do not press any key for 60 seconds during setting, the operation mode will be restored automatically.
DEFROSTING ! Caution Before defrosting, transfer the items in the freezer to another freezer to prevent them from melting. How to defrost Too thick frost on the refrigerator will decrease the cooling capacity and increase power consumption. In case of frost thicker than 4 inch, please defrost with the following instruction: Drain Cap Container Cover Hose 1. Pull out the drain cap. 2. Open the cover of the machine room. 3. Prepare the container for collecting the water with the drain hose. 4.
SAFETY PRECAUTIONS Cautions in use Outlet Do not connect multiple electric devices to one outlet It may cause fire. Plug When unplugging, be sure to hold the plug and not the cord. (Check the plug and cord regularly and replace them immediately if damaged.) Bottle and can Do not store bottles or cans They may break when frozen. Objects to be avoided Never store benzene, alcohol, medicines, and inflammables They may explode. Storage capacity Food must not exceed the “storage limit.
TIPS In case of power failure • When power failure is announced in advance: - Do not put in newly cooked food (it will increase the internal temperature). - Do not remove frost in the freezer. • When power is cut off suddenly: - Minimize the opening of the door as much as possible. - Even in summer, cooling will be maintained for 1~2 hours. MANAGING AND STORING How to manage For longer product life, please check and manage the product regularly. 1. First, pull the plug from the outlet. 2.
BEFORE REQUESTING FOR SERVICE • If there is a problem in the product, check the following first. • When checking the product, be sure to unplug it first. Symptom The cooling function has stopped completely. Cause • Is it due to the power er failure? • Is the product unplugged? ugged? • Is the switch of the earth leakage circuit brea breaker turned "OFF”? • Is the ON, OFF switch itch of the temperature co controller turned “ON”? (- mark) The freezing function is insufficient.
PRECAUTIONS Please read the Safety Precautions and take the necessary actions before use. ! Installation Precautions To prevent fire, electric shock, or electric leakage. When installing, avoid having the power plug and power cable pinned down by the showcase or other objects. Do not use the extension wire. Do not install the product where water may flow or accumulate on the ground. ! Usage Precautions To prevent injury, fire, electric shock, or electric leakage Read the user’s manual.
PRECAUTIONS To use the product properly, please read these”Safety Precautions”before use. ! Warning May cause serious damage such as death or fatal injuries ! Caution May cause serious / slight injuries or damage to property Indication examples This means that you must not disassemble the product. This mark means 「Prohibition」(do not). This means that you must disconnect the power plug from the outlet. This mark means 「Precaution」(should be observed). ! Warning Do not use a multi-outlet.
! Warning ! Do not hold the power plug with wet hands. • It may cause electric shock Ground thoroughly. • Inadequate grounding may cause electric leakage due to failure and electric shock. • Damaged electric insulation may cause electric shock or fire. Do not ground on water pipe, gas pipe, telephone line, and lightning rod. • It may cause fire or electric shock • For grounding, contact the retailer where you made your purchase. Do not install the product in a humid place.
! Warning Do not store medicine or laboratory specimens. • Do not store an item that requires strict temperature control in the showcase. When inserting your hand into the machine room at the lower back, be sure to unplug the product first. • Otherwise, it may result in electric shock or burn. • The spinning fan may cause injury. ! To replace the fuse, use a fuse with the same capacity. • The use of improper fuse may cause fire.
MANUFACTURING COMPANY ONE YEAR WARRANTY Turbo air warrants to the original purchaser of every new Turbo air refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship, under normal use and service, for a period of one(1) year from the date of original installation or 15 months after shipment date from Turbo air , whichever occurs first.
What is NOT covered by this warranty Turbo airʼs sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other than expressly covered by this warranty. 1. WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user to whom delivered.
Warranty Claims... All claims for parts or labor must be made directly thorough Turbo Air. All claims should include: model number of the unit, the serial number of the cabinet, proof of purchase, date of installation, and all pertinent information supporting the alleged defect. In case of compressor replacement under warranty, either compressor or compressor tag must be returned to Turbo Air along with above listed information. Failure to comply with warranty policies will result in voiding claims.