TPR Series Manual

REMOVAL DRAWER

TO ACCESS THE FAN MOTOR

HOT TO OPEN AND CLOSE THE HOOD LID

Fully extend the drawer out toward you as pictured.

After full extension, lift the drawer up and pull towards you.

This will disngage the rollers from the roller guide.

1. Remove the drwer guide by removing

screw in the front and back.

2. After removing the drawer guide, the

evaporator duct (shroud) will be acces-

sible. Remove the screws from the

shroud and then remove shroud. The

fan motor will be direct behind it.

1. When opening HOOD LID, push forward away

from you till locked in place at lid bracket.

2. When closing HOOD LID, lift handie and pull

up and close slowly.