- Turbo Chef Speed Cook Oven Service Manual

D
IAGNOSING AN ISSUE
Testing the Rack Oscillator (Figure 32)
NOTE: The Oven Rack will not oscillate if it is
not properly set on the support pins.
To test the Rack O
scillator:
1. From Screen 1 of the Test Mode Menu, press
the “RACK OSC” Soft Key (bottom right).
2.
When finished testing, press the “RACK OSC”
Soft Key (bottom right) again to turn the rack
oscillator off.
3.
Press the “BACK/STOP” Key to end the test
and exit the Test Mode Menu.
Enabling/Disabling the Diagnostic Mode (Figure 33)
Enable Diagnostic Mode to
o
View Cook Cycle parameters when cooking.
o
View Status Indicators (page 23) during a
Cook C
y
cle.
T
o enable/disable the D
iagnostic Mode:
1.
From Screen 1 of the Test Mode Menu, press
the “DOWN” Key to toggle to Screen 2 of the
Test Mode Menu.
2. Press “DIAG” Soft Key (top left) to turn the
Diagnostic Mode on or off.
3. When finished, press the “BACK/STOP” Key to
exit the Test Mode Menu.
Viewing Cook Counter/Time (Figure 34)
The High h Batch oven logs how many Cook
Cycles hav
e completed, as well as the cumulative
cook time.
To vie
w how many Cook Cycles have completed
and the cumulative cook time:
1. From Screen 1 of the Test Mode Menu, press
the “
DOWN” Key to toggle to Screen 2 of the
Test Mode Menu.
2. Press the “COOKS” Soft Key (middle left) to view
total number of Cook C
y
cles completed.
3. To view the cumulative cook time, press the
“
COOKS
” S
oft K
ey (middle left) again.
4.
When finished, press the “BACK/STOP” Key
to exit the Test Mode Menu.
NOTE: To permanently erase the Cook Cycle
totals, pr
ess the “ENTER” K
ey when vie
wing the
total number of completed Cook Cycles.
 : Viewing the Cook Counter/Cumulative Cook Time
LEFT
RIGHT
Step: 2/3
In this example, the oven has completed 10 Cook
Cycles. Press the “COOKS” Soft Key again to
view the cumulative cook time.
Step: 4
Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State.
Step: 1
27