- Turbo Chef Oven User Manual

2 The Speedcook Oven The Speedcook Oven
The Speedcook Oven
Controls – Speedcook Oven
Single Wall Oven & Top Oven in the Double Wall Model
The TurboChef Speedcook Oven includes a state-of-the-art interface that provides built-in, on-demand
information, and over 600 preprogrammed cook time and temperature settings. For an overview of the
seven Speedcook modes, see pages 3-4. For a list of all preprogrammed cook settings, see the
“Preprogrammed Cook Settings” document, included with this packet.
NOTE: To turn the oven on, you must select a Speedcook mode. See CookWheel (outer knob).
Classic Style Analog
Clock and Timer
The clock and timer run
with advanced electronic
control knobs.
Set Clock Knob
Use to set the time.
1. Press knob to extend.
2. Turn knob to set time.
3. Press knob back in
to original position.
Cook Navigator
TM
Consists of the Cook
Navigator Display and
the Info, Back, Cancel,
and Start keys.
CookWheel
TM
(outer knob)
Turn to select a
Speedcook mode,
Self-Clean, or to turn the
oven off.
CookWheel
TM
(inner knob)
Turn to navigate through
the options on the Cook
Navigator Screen. Press
knob to select an option,
begin a preheat cycle, or
initiate a cook cycle.
Set Timer Knob
Use to set the timer.
1. Press knob to extend.
2. Turn knob to set timer
– up to 60 minutes.
3. Press knob back into
original position.
Timer does not begin
counting down until
knob is pressed back
in to position.
Info Key
Press to display
information on the
Oven Setup (sound,
units & measurements,
display, and software
updates), Help Topics,
and Oven Tips.
NOTE: When the oven is
in the middle of a cook
cycle, you will not be able
to access the Info screen.
Back Key
Press to return to
the previous screen.
Cancel Key
Press to terminate
a cook cycle or to return
to the main screen.
Oven Light Switch
Press to illuminate the
top cook cavity.
Start Key
Press to select an option,
begin a preheat cycle, or
initiate a cook cycle.