User's Manual

23
Request, data rate, and parity
S24 Sleep mode timer 0-255 seconds 0
S25 Data Terminal Ready delay 0-255 /0.01 second 5
S26 RTS to CTS delay interval 0-255 /0.01 second 1
S27 Asynchronous/Bell/CCITT Bit-mapped register
Modes
S28 Pulse dialing Bit-mapped register
S29 Flash time 0-255 /0.01second 70
S30 Disconnect timer 0-255 /10 seconds 0
S31 Autoscan, EC result code Bit-mapped register
S32 XON character 0-255 /ASCII 17
S33 XOFF character 0-255 /ASCII 19
S36 LAPM failure options Bit-mapped register 7
S37 Connection speed Bit-mapped register 0
S38 Hang-up delay 0-255 /seconds 20
S39 Flow control options Bit-mapped register 3
S40 MNP options, break types Bit-mapped register 104
S41 Compression, retrain, DCE Bit-mapped register 195
flow control, block modes
S46 Data Compression control 136 or 138 138
S48 V.42 negotiation options 0, 7, or 128 7
S82 Break options 3, 7, or 128 128
S86 Connection failure code 0, 4, 5, 9, 12, 13, 14
S91 Transmit attenuation 0-15/dBm 10
S92 Fax attenuation 0-15/dBm 10
S95 Extended result code options Bit-mapped register
Section Eight - Result Code Summary
BASIC RESPONSE CODES
OK 0 CONNECT 1
RING 2 NO CARRIER 3
ERROR 4 CONNECT 1200 5
NO DIALTONE 6 BUSY 7
NO ANSWER 8 CONNECT 600 9
CONNECT 2400 10 CONNECT 4800 11
CONNECT 9600 12 CONNECT 7200 13
CONNECT 12000 14 CONNECT 14400 15
CONNECT 19200 16 CONNECT 38400 17
CONNECT 57600 18 CONNECT 115200 19
CONNECT 230400 ** 20 CONNECT 75TX/1200RX 22
CONNECT 1200TX/75RX 23 DELAYED 24