User's Manual

Chapter 2: GlobeSpan USB ADSL Modem Installation and Software Setup
6 GlobeSpan, Inc. Proprietary – Use Pursuant to NDA
Chapter 2: GlobeSpan USB ADSL Modem
Installation and Software Setup
WAN, LAN and ATM software drivers are supported. WAN and LAN applications support the
Microsoft Windows 98 First Edition, Windows 98 Second Edition and Windows 2000
operating systems. ATM applications support the Microsoft Windows 98 Second Edition and
Windows 2000 operating systems.
Be sure to follow the instructions provided for your PC’ s operating system.
The following information may be required for software installation. Contact your DSL service
provider before proceeding with software installation.
• Type of Driver to be Installed – WAN, LAN and ATM software drivers are supported.
The choice depends upon your DSL service provider.
• IP Address Settings – the GlobeSpan software installation process allows the server
to dynamically assign IP Address settings. If your application requires static setting of
specific address information you will need to know:
IP Address
Subnet Mask (for Bridged Ethernet applications only)
Default Gateway (for Bridged Ethernet applications only)
• Name Server Information – the GlobeSpan software installation process allows the
server to dynamically assign Name Server Address settings. If your application
requires static setting of specific address information you will need to know:
Primary DNS Address
Secondary DNS Address
Primary WINS Address
Secondary WINS Address
• ATM Virtual Path ID (VPI)
Note: Required if not using default values for driver type
• ATM Virtual Circuit ID (VCI)
Note: Required if not using default values for driver type
• Encapsulation type
Note: Required if not using default values for driver type
• Modulation type
Note: Required if not using default values for driver type
• User Name (for PPP applications only)
• Password (for PPP applications only).