User's Manual

Chapter 2: GlobeSpan USB ADSL Modem Installation and Software Setup

GlobeSpan, Inc. Proprietary – Use Pursuant to NDA

6. The “ Setup Complete” window indicates successful completion of the installation process.

Select the Yes, I want to restart my computer now option, remove any disks from their

drives, and click Finish. Your PC will reboot. Continue with the Modem Installation

section.

Modem Installation

Note: For Windows 98 SE applications, you may need the Windows 98 SE CD ROM to complete

the installation.

Once the PC has rebooted, install the GlobeSpan USB ADSL Modem.

1. Insert the rectangular end of a USB cable into the USB port of your PC.

2. Insert the square end of the USB cable into the USB port of the GlobeSpan USB Modem.

Note: The USB Modem will be detected and messages will be displayed as the modem software is

installed.

3. For Windows 2000 applications, the “ Digital Signature Not Found” window may appear

warning that the installation software is not a digitally signed version. A digital signature

is not necessary; GlobeSpan has tested the software with Windows 2000. Click Yes to

allow the installation to continue. (GlobeSpan will be releasing a digitally signed version

of the driver in the near future)