User's Manual

Chapter 5: GlobeSpan Control Panel Application
20 GlobeSpan, Inc. Proprietary – Use Pursuant to NDA
5. Select the “ Configuration” tab of the Control Panel to view and/or modify the current
connection parameter settings. When you have completed your changes click Apply. A
message will appear asking if you would like to restart the connection with the new
configuration parameters in effect. Click yes if you want the parameter changes to take
effect. Once the Control Panel reappears, click Save if you want the parameter changes
to be remembered following subsequent PC reboots.
The following connection parameters may be altered to optimize your design:
Standard
Compliance to either ANSI T1.413 Issue 2, ITU G.992.1 (G.DMT), ITU G.992.2 (G.lite),
ADI, or “ Multimode.” “ Multimode” is where the CP can detect the difference between
T1.413 standard compliant CO, Alcatel 1.4 CO or ADI CO.
Trellis
Trellis coding may be enabled/disabled. Note that trellis coding will truly be enabled only
if both CO and CP choose to enable.
TxPwrAtten
The value of transmit power attenuation can be from 0 to 12 dB, programmable in 1 dB
increments.