User's Manual

Heritage Series ADSL Bridge/ Router
7
Introduction
1.5 Front Panel
The RT710 Broadband Sharing Router has 11 status LEDs for diagnostics.
You can monitor the LEDs during operation. Following table shows the
Router status LEDs and identifies what each LED light means.
Function Behavior Definition
Dark Power off
Flash (Green) System boot-up
Light (Green) System Ready
Flashing slowly (Red) Firmware uploading
PWR/CHK
Flashing quickly (Red) Firmware writing
Dark Ethernet link absent or power off
Light Ethernet link present
L1~L4,
WAN
Flashing Data transmission
* Upper row of L1~L4 and WAN LEDs represent 100Base-T connections and lower row of
L1~L4 and WAN LEDs represent 10Base-T connections.