User's Manual

8
Introduction
1.6 Rear Panel
The rear panel of the RT710 Broadband Sharing Router consists of power
jack, WAN Port connector, 4 LAN port connectors and factory
DEFAULT
switch as shown below:
The WAN port is presented as a MDIX RJ45 connector. You can connect it
to your cable modem/ADSL with a straight-through Ethernet cable, or to
another HUB with a crossover Ethernet cable.
L1~L4 LAN ports are auto-MDIX ports which are not limited to a single
uplink port as other dumb HUB. You can use a straight-through or
crossover cable to connect any device creating a greater increase in
flexibility.