User's Manual

Heritage Series ADSL Bridge/ Router
15
System Configuration
3.2 Windows 95/98 setting for Ethernet LAN
connection
The RT710 Broadband Sharing Router is working on TCP/IP protocol. You
have to make sure your LAN card is properly installed and TCP/IP
protocol is binded with this accessing LAN card.
Since the Broadband Sharing Router build-in a
DHCP server
, you are
recommanded to configure your computer to obtain an
IP address
automatically from Router’s
DHCP server.
If you want to assign an IP for
your LAN card, please make sure your
IP address
and
Subnet Mask
is in
the same subnet as the Router. The default subnet is from 192.168.100.2 to
192.168.100.254. Following steps provides the instructions to setup your
computer to obtain an IP address by using Windows 95/98 on a PC.
3.2.1 Check TCP/IP protocol
To check if TCP/IP is properly installed, please proceed to the following
steps.
1. Double-click on
My computer
->
Control Panel
->
Network