User's Manual

2
2
System Configuration
3.4 Basic Configuration
There are four basic network connection types with this Router: 1) share a
cable modem, 2) share a leased line ADSL, 3) share a dial-up ADSL and 4)
compart your private network.
This section specifies how to configure all these four basic networks. For
Advancedd network configuration, please go
3.5 Advanced Configuration
.
3.4.1 Sharing a Cable Modem connection (default)
Cable Modem connection is widely accepted by home users. Most
broadband service providers (
NSP
or
MSO
) offer an always-on connection
without static IP assignings. In stead, they assign IP dynamically every
time the subscriber log on to the system.
You should configure the RT710 Broadband Sharing Router WAN port to
accept dynamic IP assigments. Factory default configuration was set for
this type of network connection and need no further settings. However, in
any circumstance you want to configure the Router to share a Cable
Modem connection.
1. Running your browser and go URL:
“http://192.168.100.1”
to
access the system configuration server. (If you changed the LAN
port IP, please use the new IP.)