User's Manual

Heritage Series ADSL Bridge/ Router
2
7
System Configuration
3.4.3 Sharing a dial up ADSL connection
Dial up ADSL (PPPoE, Point-to-Point Protocol over Ethernet) is a cost
effective and popular broadband connection. Although the ADSL circuit is
always attached and don’t need to dial numbers to make the circuit
connected. The dial up ADSL use the log in/ log out to active/ inactive the
data communication and counting the communication fee.
To properly set up this ADSL network, the Broadband Sharing Router
should configure its log in information and auto-disconnect setting in
WAN port configuration. Auto-disconnect time means the connection will
be disconnected utomatically if there’s no data transmission in a certain
amount of time in seconds.
1. Running your browser and go URL:
“http://192.168.100.1”
to
access the system configuration server.
2. Enter system configuration password. (The default password is
“admin” case sensitive. For security reason, please do change the
password from factory default immediately to prevent
unauthorized change of Router settings.)
3. Click on
Set-Up Wizard
4. Click on
Sharing a dial-up ADSL connection