User's Manual

Heritage Series ADSL Bridge/ Router
33
System Configuration
IP:
This is also the IP of configuration server and Router gateway
Attention: If you change the LAN IP and click OK. The Router IP will be
updated as new IP. If the IP of your PC is out of LAN IP range, please
renew your dynamic assigned or fixed IP. Use the new IP to operate further
configurations after confirms the LAN IP change.
Subnet Mask:
This value specifies the total available LAN port IP
range. You have to make sure your PC is located in this IP range
for further configuration.
2.
LAN Port DHCP Server Setting.
Set the LAN port as a DHCP
server and assign IPs dynamically.
Gateway:
This is also the IP of configuration server and Router
gateway
Subnet Mask:
Specify the subnet range. When a DHCP client
requests an IP, the DHCP server will apply this setting to client
specifying the subnet range.
DNS:
When a DHCP client requests an IP, the DHCP server will
apply this setting to client specifying the subnet range.
Domain Name:
Specify the name of your network domain.
Assign IP range start/end:
Specifies the IP range that DHCP
server can issue. The number should cover the total number of
the group, which will be served by the Router.