User's Manual

A1
0
Appendix
Appendix C Troubleshooting
This chapter is intended to help you troubleshoot problems you may
encounter while setting up and using the Router. It also describes some
common hardware and software problems and gives some suggestions to
troubleshoot them.
C.1 Diagnostics with the LEDs
Most hardware problems can be diagnosed and solved by checking the
LEDs on the front panel of your Router.
!"
If the PWR/CHK LED is dark
- Make sure the power cord is firmly plugged into the back panel
of the router and the other end into an active AC wall or power
strip outlet.
!"
If the LAN or WAN port LINK/ACT LED is dark
- Make sure your Ethernet cable is firmly plugged into the back
panel of the router and the other end into your computer or
HUB.
- Make sure you using the correct Ethernet cable on WAN port for
your application.
- Make sure your Ethernet board is installed properly in your
system by ping the IP address of your PC.