User's Manual

Check IP Address
① Go to [Start > Run]. Type ‘cmd’ command, and
click ‘OK’
9If there is abnormal values, do ‘ipconfig /release’ command and then ‘ipconfig /renew’ command.
② Type ‘ipconfig’ command, and press ‘Enter’ Key. Make sure the IP Address, Subnet
Mask, and Default Gateway.
- IP Address : 192.168.10.100 ~ 192.168.10.200 [OK]
- Subnet Mask : 255.255.255.0 [OK]
- Default Gateway : 192.168.10.1 [OK]
14