User's Manual

4.1.2 WAN Setup (Internet)

WAN Setup is for connecting internet. Check your current Internet service type, and choose one among the following 4

types. If you do not know your current service type, ask your ISP.

4.1.2.1 Use Dynamic IP Address

[Screen Descriptions]

Wan Connect Type : Dynamic IP address

Host Name :

Enter your host name like my home or my office(Optional)

Keep Connection :

This function uses when WAN side is dynamic connection. The Router send ARP packet to Gateway periodically for

checking whether the WAN side is connected or not. When disconnecting, the Router will try to connect automatically.

DNS server / Primary DNS / Secondary DNS:

Default setup is Dynamic DNS Server (recommended). If you want to use any other specific DNS Server, you can

select ‘Static DNS Server’. After selecting ‘Static DNS Server’, enter ‘primary DNS’ and ‘Secondary DNS’ IP address

which you want to use.

MAC Address Setup

Current MAC Address : the Router’s MAC Address.

MAC Address / Use MAC Address :

This function allows you to use the other MAC address on LAN side PCs, not the Router’s MAC Address. If your ISP

request your LAN side PC’s MAC address, you can clone PC’s MAC Address from your PC with MAC Clone button.

Configuration procedure is as follows,

1. Select ‘Use Manual MAC Address’