User's Manual

4.1.2.3 Use PPPoE
[Screen Descriptions]
Wan Connect Type : PPPoE
User ID / Password :
PPPoE Type requires ID & Password for internet connection. Enter ‘User ID’ and ‘Password’ which is provided from
your ISP.
Service Type :
Enter your service type like PPPoE(Optional)
MTU :
MTU(Maximum Transmission Unit) value should only be changed if advised to do so by technical support. Default
value is 1452(recommended).
Idle Time :
If the data traffic does not be activated for the idle time, the Router will disconnect WAN Connection.
Connection :
- Automatic Connect / Disconnect : The Router will try to connect WAN automatically when data traffic is activated after
disconnecting due to idle time.
- Manual Connect / Disconnect : The Router will not try to connect WAN before clicking the Connect button on HOME
screen. For disconnecting, click ‘Disconnect’ button manually.
- Keep Alive : The Router will try to connect WAN automatically whenever disconnecting.
DNS Server / Primary DNS / Secondary DNS
Default setup is Dynamic DNS Server (recommended). If you want to use any other specific DNS Server, you can
select ‘Static DNS Server’. After selecting ‘Static DNS Server’, enter ‘primary DNS’ and ‘Secondary DNS’ IP address
which you want to use.
MAC Address Setup
Current MAC Address : the Router’s MAC Address.
MAC Address / Use MAC Address :
23