User's Manual

Idle Time
If the data traffic does not be activated for the idle time, the Router will disconnect WAN Connection.
Connection
- Automatic Connect / Disconnect : The Router will try to connect WAN automatically when data traffic is activated after
disconnecting due to idle time.
- Manual Connect / Disconnect : The Router will not try to connect WAN before clicking the Connect button on HOME
screen. For disconnecting, click ‘Disconnect’ button manually.
- Keep Alive : The Router will try to connect WAN automatically whenever disconnecting.
PPTP IP Address / IP Address / Subnet Mask / Server IP Address
If PPTP modem uses static IP, select ‘Static IP’ and enter each field: IP Address, Subnet Mask, and Server IP Address.
DNS Server / Primary DNS / Secondary DNS
Default setup is Dynamic DNS Server (recommended). If you want to use any other specific DNS Server, you can
select ‘Static DNS Server’. After selecting ‘Static DNS Server’, enter ‘primary DNS’ and ‘Secondary DNS’ IP address
which you want to use.
MAC Address Setup
Current MAC Address : the Router’s MAC Address.
MAC Address / Use MAC Address :
This function allows you to use the other MAC address on LAN side PCs, not the Router’s MAC Address. If your ISP
request your LAN side PC’s MAC address, you can clone PC’s MAC Address from your PC with MAC Clone button.
Configuration procedure is as follows,
1. Select ‘Use Manual MAC Address’
2. Click ‘MAC Clone’ button; the button will copy the PC’s MAC Address which is accessing to the Router
[Button Descriptions]
OK : Save the data on screen.
RESET : discard any data you have entered and reload the file form the Router
25