User's Manual

4.2 Wireless Setup

4.2.1 Basis Setup

[Screen Descriptions]

Wireless Network

SSID

SSID is a network ID that access points & wireless devices are using. Only the wireless NIC and access point that are

using the same SSID can be communicated each other. SSID can be composed of characters & numbers and the

range is up to 30digits. You can check SSID with using AP Scanning function on a wireless client NIC. Default SSID is

‘AnyGate RG-3000A’.

NAME

Enter any name of the Router. It is not related to wireless network.

Auto Channel / Channel

If Auto Channel is enabled, just select the country out of channel country code. The Router will search and assign

the proper channel automatically. If not, select ‘Disable’, and then country name and frequency.

Wireless Advanced Setup

Operation Mode

Select one wireless type among Mixed(B+G), G only, and B Only. B means IEEE 802.11b. and G means IEEE

802.11g.

Nitro MODE

Nitro mode provides 140Mbps wireless speed. For applying Nitro mode, Enable ‘Direct Link’, ‘Compression’,

‘Concatenation’, and ‘Piggy-back ACK’. In addition, Wireless clines PC should be applied the same Nitro Mode option

as above for wireless Nitro Communication.

MAX Frame Burstadmin