User's Manual

3. Select TKIP or AES at the Encryption Algorithm.
4. Enter any characters at the WPA Shared Key filed.
9If the WPA PSK is applied to the Router, wireless Client PC have to set the same Encryption Type(TKIP or AES) and WPA
Shared Key. The following example is based on windows XP, which has to be updated latest version about wireless and security
(SP2) sections.
- Make sure to check “use Windows to configure my wireless network settings”
- Select SSID(AnyGate RG-3000A) and click Properties button.
- Select Network Authentication Type and Data Encryption Type.
WPA RADIUS or RADIUS security
Configuration procedure is as follows,
1. Select WPA RADIUS or RADIUS at the Authentication Type field.
2. Select Encryption Algorithm.
● WPA RADIUS : select WEP, TKIP or AES
In case of selecting WEP
1) Static WEP or Dynamic WEP selection will be enabled.
> Static WEP : you have to enter the WEP key of the Router manually for wireless communication.
> Dynamic WEP : you don’t have to enter the WEP key on the wireless client PC. In case of Windows XP, just
select “ The key is provided for me automatically” on windows wireless settings. The Router and wireless
client PC will communicate automatically with the Router’s WEP key.
In case of Dynamic WEP In case of Static WEP
2) Select WEP Encryption Bits 64-bit WEP or 128-bit WEP
3) Enter RADIUS Server Port Address and Port number.
4) Enter Shared Secret for communicating between the Router and RADIUS Server.
29