User's Manual

4.3 Advanced Setup

4.3.1 NAT Setup

4.3.1.1 Port Forwarding

For using virtual server on LAN side, you have to open service port(or packet). The Port Forwarding allows to open

specific port(or packet) which you register.

Configuration procedure is as follows,

1. Complete the Service Packet field

● Protocol : Select TCP or UDP

● Port : Enter service port of WAN side

2. Complete ‘Internal IP / Inter Port’ field

● IP Address : Enter the TCP/IP Address of LAN side Server.

● Port : Enter service port of LAN side.

3. Click ADD button for adding to the list box and finally click APPLY button for saving configurations.

[Button Descriptions]

● APPLY : Apply the configurations. (In order to save configurations, click SAVE button among left menu.)

● On/Off : Enable or disable the each setting value.

● EDIT : Edit the setting value.

● DEL : Delete the registered address.