User's Manual

4.3.2 Security Setup

4.3.2.1 Security Rule

The feature allows to apply ‘allow’ or ‘deny ‘ communication policy between LAN side and WAN side.

Policy

Choose ‘Allow’ or ‘Deny’

Direction

Choose ‘Int -> Ext’ or ‘Ext->Int/’

Int -> Ext : means communication direction from LAN side to WAN side.

Ext -> Int. : means communication direction from WAN side to LAN side

Protocol

Choose ‘ALL’, ‘TCP’ or ‘UDP’

Start

It is possible to set IP address range, specific MAC Address, or ALL IP. Choose one. If you want to use specific port,

Choose TCP or UDP at Protocol.

Destination