User's Manual

4.3.3 Routing Setup

This feature can make packet data that is bounding for a specific destination IP address go out through other

gateways, not through The Router.

Configuration procedure is as follows,

1. Complete Destination Field.

● IP : Enter destination IP Address.

● Mask : Enter subnet mask of destination IP address.

2. Enter Gateway IP Address.

3. Finally, click APPLY button for saving configurations.

[Button Descriptions]

● APPLY : Apply the configurations. (In order to save configurations, click SAVE button among left menu.)

● On/Off : Enable or disable the each setting value.

● EDIT : Edit the setting value.

● DEL : Delete the registered address.