User's Manual

4.5.2 Internal Port Status
Port Setup
The feature allows changing Link Mode of The Router’s WAN and LAN. If WAN side device(Modem) or LAN side
devices(NIC) works in 10Mbps, Link between the Router and the devices might be failed.
Configuration procedure is as follows,
1. Select ‘Static’ Mode at ‘Mode’ field.
2. Choose speed out of one between 100Mbps and 10 Mbps at ‘Speed’ field.
3. Choose duplex out of one between FULL and HALF at ‘Duplex’ filed.
4. Click ‘OK’ and then click ‘SAVE’ for saving the configurations.
52