User's Manual

1. Before Using, Settings

④

③

①

②

① ADSL/Cable Modem : Connect a LAN cable of Modem to WAN port of the Router.

② Wired LAN : Connect a LAN cable to LAN port between the Router and PC.

③ Hub : When need to connect 5 PC or more, extend network with Hub.

④ Wireless LAN : Wireless Adapter is needed. Compatible with IEEE 802.11b, 802.11g and Nitro XM.

9 USB Modem or Internal ADSL Modem Is not compatible with the Router uses RG-45 UTP cable on both WAN and LAN side.

9 In order to use wired LAN, NIC(Ethernet Adapter) is needed into PC. (PC side)

9 In order to use wireless LAN, Wireless Adapter(IEEE 802.11b, IEEE 802.11g, Nitro XM) is needed. (PC side)

Standard Installation Procedure is as follows,

For more details, see each guide on this user guide.

1. Cable Settings

2. WAN Settings

3. Wireless Settings

4. The Other Your Preferable Settings