User's Manual
Table Of Contents
- Table of Contents
- FCC Information ………………………………………………………….…….. I
- Chapter 1 About Wireless LAN PCI Card…………………………………… 1
- Chapter 2 Getting Started……………………………………………………… 3
- Chapter 3 Install Driver for Windows ……………………………………… 4
- Limited Warranty ……………………………………………………………… 16
- Glossary………………………………………………………………… 17
- FCC Information
- Chapter 1 About Wireless LAN PCI Card
- Chapter 2 Getting Started
- Limited Warranty
- Glossary
- IEEE 802.11 Standard
- Access Point
- Ad Hoc
- BSSID
- DHCP
- Direct Sequence Spread Spectrum
- ESSID
- Ethernet
- Gateway
- IEEE
- Infrastructure
- ISM Band
- Network
- Protocol
- SSID
- Static IP Addressing
- Transmit / Receive
- Wi-Fi Alliance
Chapter 2 Getting Started
This chapter describes the instructions that guide you through the proper
installation of your IEEE 802.11g PCI Wireless LAN Card for the Windows
XP/2000/ME/98SE operating systems. The complete installation of the IEEE
802.11g PCI Wireless LAN Card consists of the following steps:
Step 1: Insert your IEEE802.11g PCI Wireless LAN Card into your PC.
Step 2: Install the corresponding driver and utility.
Step 3: Set basic settings.
Step 4: Finish Installation.
2-1 Before Installation
In addition to the items shipped with the client Card, you will also need the
following in order to install the Card:
1. A computer equipped with a PCI 2.2 slot.
2. Windows XP/2000/98SE/ME (with a Windows installation CD-ROM,
diskettes for use during installation).
3. Minimum 5 Mbytes free disk space for installing driver and utility
program.
2-2 Insert the 802.11g Wireless LAN PCI Card
To install the IEEE 802.11g PCI Wireless LAN Card, please do the following:
1. Find an available PCI slot on your computer.
2. Insert the PCI Card into the PCI slot.
- 3 -