User's Manual
Table Of Contents
- Table of Contents
- FCC Information ………………………………………………………….…….. I
- Chapter 1 About Wireless LAN PCI Card…………………………………… 1
- Chapter 2 Getting Started……………………………………………………… 3
- Chapter 3 Install Driver for Windows ……………………………………… 4
- Limited Warranty ……………………………………………………………… 16
- Glossary………………………………………………………………… 17
- FCC Information
- Chapter 1 About Wireless LAN PCI Card
- Chapter 2 Getting Started
- Limited Warranty
- Glossary
- IEEE 802.11 Standard
- Access Point
- Ad Hoc
- BSSID
- DHCP
- Direct Sequence Spread Spectrum
- ESSID
- Ethernet
- Gateway
- IEEE
- Infrastructure
- ISM Band
- Network
- Protocol
- SSID
- Static IP Addressing
- Transmit / Receive
- Wi-Fi Alliance
Chapter 3 Install Driver for Windows
This section describes the installation of the IEEE 802.11g PCI Wireless LAN
Card driver for the Windows 98SE/ME/2000 and Windows XP operating
systems. The installation procedures for Windows XP refer to 3-1 Set up
IEEE802.11g PCI Wireless LAN Card for Windows XP; for Windows 2000
please see 3-2 Set up IEEE802.11g PCI Wireless LAN Card for Windows 2000;
for Windows ME refer to 3-3 Set up IEEE802.11g PCI Wireless LAN Card for
Windows ME; for Windows 98SE refer to 3-3 Set up IEEE802.11g PCI Wireless
LAN Card for Windows 98SE.
Note: Before you start the installation, you are advised to keep the Windows CD-ROM in
case you might need certain system files.
3-1 Set up IEEE802.11g PCI Wireless LAN Card for Windows XP
Step 1: After inserting the IEEE 802.11g PCI Wireless LAN Card into the PCI
slot on your PC and turn PC on, the Windows will auto-detect the PCI
Wireless LAN Card and a “Found New Hardware Wizard” window
will show up.
Insert the Product CD-ROM into the appropriate drive and select
“Install the software automatically (Recommended)”.
Then press Next button to install the driver.
- 4 -