How to Guide
18 TurboLock TL111 PRO
Section 5
Using the Lock
To unlock the TL111, use the keypad to enter the passcode, then press ‘#’. The TL111 will engage and unlock the door.
• The Admin Password must be changed from the default manufacturing password. See Section 6.1.
• The TL111 will automatically lock again after a few seconds.
Section 6
Keypad Passwords
6.1 Changing the Admin Password
• The Admin Password must always be exactly 6 digits long.
• The default Admin Password is ‘123456’.
For security, it is highly recommended that you change the Admin Password from the manufacturer default.
Step 1. Press the ‘#’ on the keypad, and enter the default (‘123456’) or the current Admin Password then press ‘#’. The TL111
will beep 3 times. It’s now in Setup mode.
Step 2. Enter ‘1’ then press ‘#’.
Step 3. Enter the new Admin Password then press ‘#’. The TL111 will beep 3 times, indicating a successful operation.
Step 4. Test the new Admin Password to conrm the modication was successful.
• The password must be entered while the keypad backlight is on. If it goes out, begin again at Step 1.
• If the Admin Password is lost or forgotten, the lock may be reset. Refer to Section 9, Option 2.