How to Guide

20 TurboLock TL111 PRO
6.4 Delete All Passcodes
Step 1. Pres s ‘#’ on the keypad, and enter the current Admin Password. Then press ‘#’ again .
Step 2. The TL111 will beep 3 times. Enter ‘4’ then press ‘#’ before the keypad turns o󰀨.
Step 3. After another 3 beeps, the keypad will turn o󰀨 and all passcodes will be deleted.
Step 4. Test all previous keypad passcodes. They should now be unusable. Note: The Admin passcode will not be deleted
using this method.
6.5 Passcode Disguise
This function is an added security feature which is aimed at preventing password theft. With Passcode Disguise, you may enter 12
digits into the keypad. As long as the correct password sequence is entered, regardless of how many digits were entered before
or afterwards, the TL111 will unlock.
For example, if your user password is “080808“, you can successfully unlock the TL111 by entering “11354080808”, “11080808”,
“10808081” and so on.
Section 7
Using the Passive Function
With this function active, the TL111 can open the door without requiring a password.
USE WITH CAUTION. Remember to turn o󰀨 the function when it is no longer needed. Do not leave this function on for
extended periods of time.
Turning On the Passive Function
Step 1. Press ‘#’ on the keypad, and enter the current Admin Password, then ‘#’. The lock will engage and beep 3 times. The
lock is now in Setup mode.