In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials. Version 2.
www.turbolock.
Table of Contents Section 1 Information & Safety Warnings 4 1.1 Introduction 1.2 Safety Warnings 1.3 End-of-Life Disposal 4 4 5 Section 2 Package Contents & Overview 6 2.1 2.2 2.3 2.4 6 6 7 7 Contents Overview Battery Information Usage Overview Section 3 Installation (Retrofit) 3.1 Pre-Installation 3.2 Main Installation Section 4 9 9 11 Installation (New) 13 4.1 Pre-Installation 4.2 Main Installation 13 17 Section 5 Using the Lock Section 6 19 19 6.1 6.2 6.3 6.4 6.
Section 1 Information & Safety Warnings 1.1 Introduction This user manual will guide you through the functions and usage of your TURBOLOCK TL117 Bluetooth-enabled Smartlock. It is important that you follow all instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use your lock. If you have questions not answered by this manual or are in need of repair or non-routine service, contact customer service at 1-855-850-8031.
• Use only the parts included in the original packaging or received from TURBOLOCK. • Verify all surfaces are flat and level before beginning installation. Installation on doors or surfaces with any type of deformity such as gaps or warping may cause the lock to malfunction or fail to operate entirely. • Expected use is for standard doors made for buildings within the U.S. • New batteries on average can deliver up to one full year of use before replacement is needed. Battery life varies by usage.
Section 2 Package Contents & Overview 17 18 2.1 Contents TL117 Bluetooth-enabled Smartlock x 1 21 Inside Knob x 1 16 Latch Assembly x 1 Wood Screws x 6 19 Mounting Screws x 2 Plate x 1 20 1 Keys x 3 13 14 2 2.2 Overview 1: 2: 3: 4: 5: 6: 6 Keypad Key Hole Micro-USB Charging Port Speaker Power Cable Wood Screws TURBOLOCK TL117 7: Strike 8: Strike Box 9: Inside Screw 10: Inside Thumb Turn 11: Reset Button 12: L/R Switch 3 4 11 10 5 - Requires 4x AA batteries (not included).
2.3 Battery Information The lock requires four standard ‘AA’ batteries. New batteries should be installed as soon as possible after receiving the first lowbattery warning, as indicated by a single red flash on the indicator and a voice confirmation: “Low battery. Please replace the battery.” After that first notification, the lock will only have enough power for approximately 50 uses before the batteries are fully depleted. Low-battery notification will come from the lock itself. 2.
Using an E-Key Admin generates and shares e-keys through the Tubolock Plus app. In order to use the e-key, however, the person being shared with must also download the Turbolock Plus app and register for an account. Once logged in, the trusted users can receive and use e-keys. Refer to Section 8.5 Use E-Keys in App for more information. E-keys may have restricted access according to the app Admin’s discretion. All e-key usage is logged in the Turbolock Plus Lock View history log.
Using the Emergency Power Port Supply power via the Emergency Power Port on the bottom of the lock. The backlight will flash indicating the lock is receiving power. Enter a Passcode and then press ‘ ’ to unlock the door as usual. Section 3 Installation (Retrofit) This section details installation steps needed if you are installing the TL117 on a door with a single cutout already made. Replacing an older fixture with a newer one is known as a retrofit.
Part 2 - Installing the Latch KEEP DOOR OPEN AT ALL TIMES SHORTLY BEFORE, DURING AND SHORTLY AFTER INSTALLATION. If the lock is incomplete or improperly installed, the lock and/or door may become stuck. After finishing installation, be sure to use the door at least once with the door remains open to make sure all parts of the lock function correctly. Step 1. Check the dimensions of the door before installing the latch (Fig. 2). Step 2. Check the UP icon on the latch and insert the latch into the hole.
1.安装前请将 室外面板锁尺剪断至相对应的门厚尺寸(示意图请参照快速指南),将室外面板锁尺调整为下图所示. 3.2 Main Installation Step 1. Use a screwdriver to extend the bolt. The bolt must be EXTENDED prior to installing the lockset (Fig. 6). 注意：安装是请将钥匙拔掉，锁尺调整为竖状。 锁体长度调整及安装图 调整方法： 根据上图所示方向用力旋转锁舌， 并拉动锁舌即可调整至60mm或 Fig. 6 2.将室外面板连接线从锁芯下面穿过门板，锁尺和螺丝柱对准锁芯穿过 （如下图） 。 70mm卡点，在将锁舌回旋，将点卡好。 请按门的实际宽度调整锁体的长度， 当锁体点调整至60MM位置时， 请按基准线60MM打孔； 当锁体点调整至70MM位置时， 请按基准线70MM打孔。 锁体安装图 门框锁扣盒及锁扣板开孔图 Power Cable Step 2. Start with the outside section.
Step 5. Make sure that the latch pin is vertical and the bolt is extended (Fig. 9). 2x Inside Screws Connectors RESET Vertical Latch Pin Vertical Inside Thumb Turn Fig. 10 Fig. 9 Fig. 11 1x Inside Screw Step 6. Gently insert the power cable connector into the connector of the inside section to snap them together. And collect the connected power cable into the slot of inside section (Fig. 10). Step 7.
Section 4 Installation (New) Mark Hole Backset Latch Hole This section details installation steps needed if you are installing the TL117 on a door without a cutout. If you are using the TL117 to replace an old lock or if your door otherwise already has a cutout, please go back to Section 3. Side Hole • For easier installation, have another person help to hold the lock. • For your convenience, installation instructions are broken into segments.
Part 2 - Disassemble the Lock The lock is pre-assembled upon arrival. Before installation, loosen the wood screws and mounting screws to separate the lock into four main parts: Plate Outside Assembly Outside Assembly x 1 Inside Assembly x 1 Latch Assembly x 1 Plate x 1 Inside Assembly Latch Assembly (Fig. 1) Part 3 - Installing the Latch Step 1. Check the UP icon on the latch and insert the latch into the hole. Using a pencil, mark a line around edge of latch plate to use as a guide.
Step 3. Insert the latch into the hole and check it. The latch’s plate should sit flush against the edge of the door (Fig. 3). If there’s too much space behind the latch, or if it’s sticking out of the door, the latch should be adjusted. If the latch needs adjusted, move to Step 4; otherwise, skip to Step 5. Step 4. Hold the front of the latch and the square opening from both sides, pull or push to extend or retract the latch end as needed (Fig. 4). Insert the latch back into the door. Step 5.
Step 6. Hold the strike plate over the mortise. Using a pencil, mark a line around the edges of plate to use as a guide. After marking at the straight edges of the plate, remove the plate. Step 7. Chisel about 1.5mm deep or until strike plate sits flush with door frame. • If you choose to use the strike box, you may need to chisel slightly deeper. • During chiseling, it’s highly recommended to stop and check to see if the strike plate sits flush in the doorframe over the strike box.
1.安装前请将 室外面板锁尺剪断至相对应的门厚尺寸(示意图请参照快速指南),将室外面板锁尺调整为下图所示. 4.2 Main Installation Step 1. Use a screwdriver to extend the bolt. 锁体长度调整及安装图 注意：安装是请将钥匙拔掉，锁尺调整为竖状。 The bolt must be EXTENDED prior to installing the lockset (Fig. 6). 调整方法： 根据上图所示方向用力旋转锁舌， 并拉动锁舌即可调整至60mm或 2.将室外面板连接线从锁芯下面穿过门板，锁尺和螺丝柱对准锁芯穿过 （如下图） 。 Fig. 6 70mm卡点，在将锁舌回旋，将点卡好。 请按门的实际宽度调整锁体的长度， 当锁体点调整至60MM位置时， 请按基准线60MM打孔； 当锁体点调整至70MM位置时， 请按基准线70MM打孔。 Power Cable 锁体安装图 门框锁扣盒及锁扣板开孔图 Step 2. Start with the outside section.
Step 5. Make sure that the latch pin is vertical and the bolt is extended (Fig. 9). 2x Inside Screws Connectors RESET Vertical Latch Pin Vertical Inside Thumb Turn Fig. 10 Fig. 9 Fig. 11 1x Inside Screw Step 6. Gently insert the power cable connector into the connector of the inside section to snap them together. Collect the connected power cable into the slot of the inside section (Fig. 10). Step 7.
Section 5 Using the Lock To unlock the TL117, use the keypad to enter the passcode, then press ‘ ’. The TL117 will unlock after the voice confirmation (“Opened”). Press “ “ to lock the door as needed. The admin passcode must be changed from the default. Refer to Section 6.1 Changing the Admin Passcode. The TL117 can also be unlocked using e-keys shared through the Turbolock Plus app. E-keys are always logged by the Turbolock Plus app’s Unlock Records (see Section 8.3 App Usage).
6.2 Adding Keypad Passcodes Keypad passcodes can be created so that more people can gain entry access as needed. USE WITH CAUTION. Anyone with the keypad passcode can unlock the TL117 until the keypad passcode is deleted. If more control is needed, refer to Section 8. • The admin must create passcodes for users. • Keypad passcodes for users must be 4 or 6 digits long. • The TL117 can hold up to 9 keypad passcodes.
6.3 Delete a Single Passcode Step 1. Press ‘ ’ on the keypad, and enter the current admin passcode. Then press ‘ ’ again. Voice navigation will guide you through the process: “To delete a user passcode, please press 3.” Step 2. Enter ‘3’ then press ‘ ’ before the keypad turns off. Step 3. Before the keypad turns off, enter the passcode you want to delete, then press ‘ ’. Step 4. After the voice confirmation (“Success”), the old passcode should be deleted. Step 5. Test the old Passcode.
6.5 Passcode Disguise This function is an added security feature aimed at preventing passcode theft. With Passcode Disguise, you can enter up to 12 digits into the keypad. As long as the correct passcode sequence is entered, regardless of how many digits were entered before or afterwards, the TL117 will unlock. For example, if your user Passcode is “080808”, you can successfully unlock the TL117 by entering “11354080808”, “11080808”, “10808081” and so on. Section 7 Using the Mute Function USE WITH CAUTION.
Section 8 The TurboLock Plus App The TurboLock Plus app, compatible with most Android and iOS smartphones, grants access to all of TL117’s features. Through the app, you can unlock the TL117, create and send passcodes (E-Keys), track unlocking records and more. To get the app, follow the instructions below. the 8.1 App Installation Step 1. On your smartphone, search for the “TurboLock Plus” app in the Google Play or App Store. Step 2. Download and install the app. Step 3.
Pairing to another smartphone To pair a different smartphone with the lock, you must reset the lock using the steps below. Resetting the lock will revert the admin passcode to the default and delete all user and keypad passcodes. After the new smartphone is paired to the lock, the previous phone will no longer have Admin privileges. For app operations, there is only one admin, but there can be multiple users. Step 1. Press ‘ ‘ on the keypad, enter your current admin passcode, then press ‘ ’.
8.3 App Usage From the lock list screen (Fig. 21), tap operation screen (Fig. 23 and Fig. 24). Fig. 21 Fig. 22 get more information about lock service (Fig. 22). Or tap the name of lock to enter • Images for illustrative purposes only. Actual content may vary. • App content subject to change without notification. • App content may differ depending on operating system. • Before using App to open the lock, make sure the Bluetooth status icon is lit up ). This means it has connected successfully.
8.4 Generating Keypad Passcodes For users without the TurboLock Plus app, the Admin can generate a 4 or 6-digit passcode that users can manually enter on the TL117 keypad to unlock. This 4 or 6-digit code can be revoked at any time by the Admin. This is a temporary unlock code that can be used 1-3 times, as assigned by the Admin. Temporary keypad passcodes are not logged via the Turbolock Plus Unlock Records (see Section 8.3 App Usage) and should only be used for temporary access.
8.5 Managing User Passcodes (E-Keys) User Passcodes (E-Keys) are generated on the TurboLock Plus app by the Admin and shared with a user. That user must install the TurboLock Plus app on their smartphone and register for a TURBOLOCK account. Every e-key use is logged in the Turbolock Plus Lock Access history log. E-Keys can be permanent or have time restrictions, at the Admin’s discretion. For added security, the TL117 does not have integrated Wi-Fi.
Section 9 Resetting the Lock • Resets cannot be reversed. • Performing a reset will delete all passcodes, including the admin passcode and app-generated temporary keypad passcodes. Any device paired/synced with the TL117 will be removed. • Once all passcodes are erased, only the default admin passcode can open the lock. Reset Button Inside Section • After a reset: ○○ Admin passcode reverts to default: 123456. ○○ Choose a new admin passcode immediately. See Section 6.1 Changing the Admin Passcode.
Section 10 Specifications Item Description Model Name TL117 Battery Type 4 x AA batteries Net Weight 2.2 lb / 980g Dimensions 8.2 x 5.8 x 4.3 in (208.6 x 148.4 x 108.5 mm) Material Zinc Alloy Deadbolt Spring Stand-by Consumption Physical Keys <50mA 3 Number of E-Keys Unlimited Temporary Keypad Codes Keypad Codes Up to 300 temporary (keypad) passcodes can be generated from the app, distributed evenly between the three Code Usage limits.
Section 11 Maintenance Proper cleaning and maintenance of your lock ensures it will continue to work as it should. • For most cleaning purposes, use clean (or purified) water and a soft, non-abrasive cloth. • If a mess cannot be cleaned with water, apply a gentle cleaner to the cloth and clean. • Do not apply cleaner or detergent directly to any part of the lock. • After cleaning with a cleaner or detergent, wipe off any residue using a second non-abrasive cloth.
Problem(s) Possible Cause(s) Solution(s) Why does the lock jam? / The door doesn’t close. The latch size is wrong. Disassemble the lock and check the latch assembly. If retrofitting, compare the latch length and adjust as needed. If installed on a new door, adjust the latch and/or, drill into the door to fit the latch as needed. The strike plate and latch aren’t correctly aligned. Open the door and check the alignment of both the latch and the strike plate. Adjust as needed.
Problem(s) Possible Cause(s) Solution(s) Can not generate temporary keypad passcodes from app. For the first time use, didn’t tap “Reset Keys” ( ) on the app home screen. For the FIRST TIME USE: Make sure the app is connected. Tap “Reset Keys” ( ) on the app home screen then proceed to generate temporary (keypad) passcodes. The 300 temporary keypad passcodes limit is reached. New Passcodes cannot be generated if the limit is reached.
Section 13 Warranty 13.1 Violation The lock cannot be repaired or serviced within its warranty period if any of the following has occurred: • The warranty has expired • Damage occurred during or in relation to non-routine and/or unauthorized disassembly • Failure to provide a valid proof of purchase when requesting service or repair • Damage occurred as a result of natural disaster etc.
not cover items out of production if the product is no longer made or stocked. This Warranty is not assignable or transferable. The original purchaser may call the toll-free number at 1-855-850-8031 for service requests. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes WP’s property. This warranty only covers technical hardware defectiveness during the warranty period and under normal use conditions.
COPYRIGHT © 2020 TURBOLOCK. ALL RIGHTS RESERVED.
