Manual

SKYLINE R32 GTS-T BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia Ph: [phone] Fax: [phone] Email: [e-mail]
USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA Ph: [phone] Fax: [phone] Email: [e-mail]
PART NUMBER
FG-ADM-R32
BOV adaptor.
- Ensure that the grub screws and lock-nuts are tightened on the
adaptor elbow.
- Ensure the supplied gasket is installed between the manifold
pipe flange and the R32 adaptor.
- Ensure the factory plumb back fitting is blanked off with the
blanking plug supplied.
- Ensure the spring clamp is secured on the Silicon hose and
BOV.
- Re-adjust the setting of your BOV. Please refer to your BOV
fitting instructions for further information.