User Manual
18 iQ Series Quick Start Guide 19
iQ15 iQ15B iQ18B
System
Frequency response
50 Hz – 18 kHz ±3 dB
42 Hz – 20 kHz -10 dB
50 Hz – 130 Hz ±3 dB
40 Hz – 130 Hz -10 dB
50 Hz – 100 Hz ±3 dB
36 Hz – 100 Hz -10 dB
Nominal dispersion 75° H x 55° V @ -6 dB points Half Space Half Space
Maximum SPL 132 dB peak 130 dB peak 132 dB peak
Crossover type Active Active Active
Transducers
1 x 1" (387 mm) LF driver
1 x 1" (25.4 mm)
HF compression driver
1 x 15" (385.7 mm) LF driver 1 x 18" (460 mm) LF driver
Limiter
Independent HF, LF,
peak and rms
Peak and rms Peak and rms
Ampli er
Maximum output power* 2,500 W 3,000 W 3,000 W
Type Class-D Class-D Class-D
Protection Short circuit, open circuit, thermal Short circuit, open circuit, thermal Short circuit, open circuit, thermal
Connectors
Input A / B 2 x combo jack/XLR 2 x combo jack/XLR 2 x combo jack/XLR
Sensitivity Line +4 dBu, mic -22 dBu, switchable Line +4 dBu Line +4 dBu
Input impedance 20 k unbalanced, 40 k balanced 20 k unbalanced, 40 k balanced 20 k unbalanced, 40 k balanced
Maximum input level +21 dBu +21 dBu +21 dBu
Output A / B 2 x XLR Linked to input 2 x XLR Linked to input 2 x XLR Linked to input
Mix output XLR, balanced N/A N/A
Output impedance 100 unbalanced, 200 balanced N/A N/A
Ultranet input/link 2 x RJ45 2 x RJ45 2 x RJ45
Mains Supply Neutrik powerCON input 20A andlink 15A Neutrik powerCON input 20A andlink 15A Neutrik powerCON input 20A andlink 15A
Controls
DSP
Rotary push-encoder
Buttons for PROCESS, SETUP, EXIT, ENTER
Rotary push-encoder
Buttons for PROCESS, SETUP, EXIT, ENTER
Rotary push-encoder
Buttons for PROCESS, SETUP, EXIT, ENTER
Mixer section
2 x gain controls
(channels A and B)
2 x Line/Mic switch
1 x gain controls
(channels A and B)
2 x Line
1 x gain controls
(channels A and B)
2 x Line
User DSP Functions
Factory EQ presets
Positioning, Sound mode,
Sound Modeling, FBQ
Positioning, Sound mode,
Sound Modeling, FBQ
Positioning, Sound mode,
Sound Modeling, FBQ
Display LCD 128 x 32, blue backlit LCD 128 x 32, blue backlit LCD 128 x 32, blue backlit
Delay 0 - 300 ms 0 - 300 ms 0 - 300 ms
Equalisation
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
Limiter Zero attack input limiter Zero attack input limiter Zero attack input limiter
Presets 20 total presets, 19 user-de nable 20 total presets, 19 user-de nable 20 total presets, 19 user-de nable
Crossover High Pass L-R 24 dB/oct Low Pass L-R 24 dB/oct Low Pass L-R 24 dB/oct
Protection Lock-out function for all settings Lock-out function for all settings Lock-out function for all settings
iQ15 iQ15B iQ18B
Ultranet Digital Network
System
Signal
Latency
16 channels
< 0.9 ms
16 channels
< 0.9 ms
16 channels
< 0.9 ms
Cabling
Cables
Cable length
Shielded CAT5
max. 246 ft / 75 m recommended
Shielded CAT5
max. 246 ft / 75 m recommended
Shielded CAT5
max. 246 ft / 75 m recommended
Power Supply
Power consumption 150 W @
⁄
max power 200 W @
⁄
max power 200 W @
⁄
max power
Voltage (fuses)
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V)
UK / Australia / Europe
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Korea / China
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Japan 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 15 A H 250 V)
Enclosure
Dimensions HWD
711 x 450 x 381 mm
(27.9x 17.7 x 15.0")
602 x 445 x 495 mm
(23.7x 17.5 x 19.5")
691 x 533 x 559 mm
(27.2x 21.0 x 22.0")
Net weight 26.1 kg (57 lbs) 30.6 kg (67 lbs) 39.8 kg (87.5 lbs)
Construction Injection-moulded polypropyleneenclosure Birch plywood, screwed, andglued Birch plywood, screwed, andglued
Finish Black painted Black painted Black painted
Grille Powder coated perforated steel Powder coated perforated steel Powder coated perforated steel
Flying hardware M10 x 3 points N/A N/A
Accessories
IQ15-WB Steel wall bracket
*independent of limiters and driver protection circuits
Technical Speci cations