User Manual

10 iQ Series Quick Start Guide 11
Networked mains power
iQ loudspeakers also facilitate networked transmission of mains power using power cables with NeutrikpowerCON locking power connectors. To set up networked
mains power between iQ loudspeakers,  rstrun a power cable terminating in a powerCON connector to the AC INPUT connector on the rear panel. Topower additional
speakers downline, run power cables equipped with powerCON connectors at both ends from the  rst speaker’s AC LINK OUTPUT to the AC INPUT of the next iQ
loudspeaker in series. Themaximum number of linked systems depends on the AC supply voltage as well as the maximum current draw of the individual systems in
the power chain. When linking a power chain, make sure that the integrated connectors as well as the supplied AC mains cable are never overloaded. If you are
uncertain how to calculate the total current draw, please contact your dealer.
iQ speakers powered in series
iQ DSP Menu Structure
Fullrange Subwoofer Function
PROCESS MODEL
Model "xyz" Model "xyz"
Choose from di erent sound Models, either the
TURBOSOUND signature voicing or a DSP model
of an industry standard product.
(alt., MODEL active)
EQ
None None
Sets the frequency response to the default
setting.
Live Live
Sets the frequency response to a typical live
sound setting.
Speech Speech
Sets the frequency response for optimal speech
intelligibility.
Playback Playback
Sets the frequency response ideal for music
playback.
User User
Lets you de ne your own frequency response
setting by entering the corresponding sub menu.
Sub menu
Low/ High Shelving Low/ High Shelving Lets you de ne a low and high shelving  lter.
Parametric 1 & 2 Parametric 1 & 2
Lets you de ne a parametric bell-type EQ
(Frequency, Qual and Gain).
XOVER
None None
Unit is set for default full range/ subwoofer
reproduction.
—iQ8
Preset with ideal settings for use in combination
with iQ8 fullrange speaker.
—iQ10
Preset with ideal settings for use in combination
with iQ10 fullrange speaker.
—iQ12
Preset with ideal settings for use in combination
with iQ12 fullrange speaker.
—iQ15
Preset with ideal settings for use in combination
with iQ15 fullrange speaker.
iQ15B —
Preset with high pass alignment for iQ15B
subwoofer.
iQ18B —
Preset with high pass alignment for iQ18B
subwoofer.
User User
User crossover sub menu for combination with
other fullrange or subwoofer speaker systems.
Sub Menu
Freq Freq
Select the desired crossover frequency:
For Fullrange Systems: 75 Hz to 400 Hz
For Subwoofer Systems: 50 Hz to 150 Hz
Phase Phase Adjust the absolute phase (0° or 180°)