User Manual

12 iQ Series Quick Start Guide 13
Fullrange Subwoofer Function
FBQ
Auto Auto
Automatically sets as many  lters as required.
Whenever a new feedback frequency is
discovered, the  rst  lter will be released to
attenuate the new frequency, and so forth.
Single Single
Activates the FBQ (feedback detection)
functionality, up to 8 feedback  lters.
Learn Learn
Automatic procedure which searches for
feedback frequencies and locks settings after all
8  lters have been set.
WARNING!
Please use ear protection during this
procedure. The feedback signal may
approach the system’s maximum level,
which may cause hearing damage!
Reset Reset Resets all  lters.
SETUP
(page 1)
INPUT
Input Input
Lets you choose the audio input source. Chose
between Local (Analogue Input) or ULTRANET
(e.g., P16 monitoring system or
M32 audio via ULTRANET).
Trim Trim
Adjusts the input gain of the ULTRANET digital
inputs in a range
fm +10 dB to - 30 dB
Remote Remote
Enables ULTRANET remote control functionality
in order to protect against misuse.
VU VU
Displays the respective input level of all 16
channels receiving via ULTRANET; only visible
when ULTRANET input is selected.
POSITION
Stand Floor
For positioning the speaker on a pole mount
stand (fullrange) or on the  oor (subwoofer).
Wall Wall
For positioning the speaker on or next to a wall
( xed install); alternatively as a monitor speaker
(wedge).
Ceiling —
For positioning the speaker on a wall next to the
ceiling ( xed install).
Corner Corner
For positioning the speaker in a corner next to
the ceiling ( xed install); For positioning the
speaker in a corner (subwoofer).
DELAY
Delay Delay
Adjusts the amount of delay (max 300msec =
103.08m or 338.19 feet).
Unit Unit Selects between msec, meter and feet.
LIMITER
Limit Limit
Adjust the limiter threshold for the input
signal (from OFF up to -30 dB). This threshold
adjustment allows you to set a max output power
which is below the iQ system’s rated max output.
Fullrange Subwoofer Function
SETUP
(page 2)
Version Version Displays the installed  rmware version.
LOAD
1. - 20. 1. - 20.
To load a speci c preset, turn the encoder to
select the desired peset’s number, and then
either the ENTER button or the encoder. When
asked to con rm press the encoder again or EXIT
to abort.
SAVE
1. - 20. 1. - 20.
To save a preset choose the respective preset slot
and press ENTER or the encoder.
Sub Menu
Save Preset Save Preset
Name the preset by choosing the characters
with the encoder and pressing to con rm each
character. When  nished, press the ENTER button
to save the preset.
Setup
Contrast Contrast
Adjust LCD panel contrast.
The default contrast value is 15.
Screen Screen
ON: LCD screen saver (default)
turns on automatically after
approx. 2 minutes.
OFF : LCD turns o automatically after approx. 5
minutes.
Logo Logo
OFF: Deactivates front panel
logo illumination.
ON: Activates front panel
logo illumination.
LIMIT: Logo will light up when the limiter is
active.
SETUP
Sub Menu
Lock Lock
Lock the device and creat a password by choosing
the password characters with the encoder
and pressing to con rm each character. When
 nished press the ENTER button. Unlock the
device by entering the password or connecting
the unit via USB to a PC running iQ software. The
software does not require a password.
Warning Warning
In case of overheating, an alert appears on the
LCD screen, and the ampli er will shut down
until the unit cools.
LCD Graphic Indicators
To help the user immediately recognize that a parameter has been selected and changed from the initial default setting, the parameter’s related text on the top-level
screen will invert and change to black text on a white background. As an example, the following screenshots show how the text for the MODEL function changes when
the iQ8 default sound has been changed to the modeled PS8 sound:
This indicator function occurs only on the main DSP menu level and works for all DSP-related functions, except for the LOAD, SAVE and SETUP sub-sections on the
second page of the top-level SETUP menu.